|
Features
Self
spreading layer forms a mono layer of molecules on the
surface of the water resulting in evaporation
reduction. Layer will reform after each pool use
and biodegrades in 48-72 hours. Best if applied daily.
Performance
Up to 40% reduction in evaporation saving millions of
gallons per year on large pools.
Save
Water Solutions Inc Liquid Pool Cover forms immediately
after application full coverage within 20 minutes.
Other
Information
For best results, Heatsavr™ should be
applied once at the end of the pool-use day.
Add Heatsavr™ directly to the pool
water at a rate of 4 oz. per 1500 sq.ft. of pool surface
area (width x length).
Heatsavr™ may be stored for a long
period of time without losing strength. Avoid storing
below 65 degrees F (18.4 C). If white residue forms at
the bottom, immerse bottle in warm (tap) water until
residue disappears.
In concentrated form, Heatsavr™ is
flammable and should be stored safely. If eye contact
occurs, wash with water for 15 minutes and contact a
physician
Energy Savings
Heatsavr™ will save energy in EVERY pool, but heat cost
savings vary according to the hours of swimmer use per day,
ventilation efficiency, and especially the type and cost of
fuel used. The cost of energy also varies from region to
region. Tests have proven that heat bill savings range from a
low of 15.5% at a high use 50-meter municipal pool, to a high
of 40% at a low use condominium pool.
|
1-866-835-5018